Level 3
A rectangular tank measuring 60 cm by 50 cm by 25 cm was to be filled with water by two taps, A and B. Tap A which fills the tank at a rate of 8ℓ per minute was first turned on for 5 minutes before Tap B was turned on as well. If the tank was filled to the brim in a total of 7 minutes from the time when Tap A was first turned on, what is the rate at which Tap B fills the tank? Give the answer in ℓ per minute correct to 1 decimal place.
3 m
Level 3
Tank A, measuring 40 cm by 30 cm by 50 cm, was filled with water to the brim. Water was then poured from Tank A to Tank B, which has a base area of 900 cm2 until the height of the water level in Tank B became twice that of the water level in Tank A. Find the volume of water in Tank B, leaving the answer in litres.
3 m
Level 3
An empty rectangular tank has a capacity of 90ℓ and a height of 50 cm. At 10 am, Tap A is turned on to fill the tank at a rate of 4ℓ per minute for 15 minutes. After 5 minutes, Tap B is turned on to drain water from the tank at a rate of 2ℓ per minute for 18 minutes. What is the height of the water level in the tank in the end? Express the answer in 1 decimal place.
3 m
Level 3
Tank A measuring 54 cm by 14 cm by 25 cm contains 4.7 ℓ of water. It is being filled with water flowing from Tap X at 0.9ℓ/min and Tap Y at 995 mℓ/min. Both taps are turned on at the same time. How long does it take to fill up Tank A till it is 75% full? Correct the answer to 1 decimal place.
3 m
Level 3
The figure is not drawn to scale. Tank A measuring 40 cm by 30 cm by 20 cm is filled to the brim. When 35 of water was transferred from Tank A to Tank B, 1.8 litres of water overflowed. Tank B has a base area of 300 cm2. Find the height of Tank B.
3 m
Level 2 PSLE
Carlo filled a container with water using two taps. He turned on Tap A first and after 4 minutes, he also turned on Tap B. Both taps were turned off at the same time when the container was completely filled without overflowing. The graph shows the amount of water in the container over 16 minutes.
  1. What fraction of the container was filled 4 minutes after Tap A was turned on? Express your answer in the simplest form.
  2. In one minute, how many litres of water flowed from Tap B?
3 m
Level 3
Tap A can fill up a tank in 2 hours. Tap B can fill up the same tank in 6 hours. How long will it take to fill up the tank if both taps are turned on at the same time? Express the answer(s) in h.
3 m
Level 3
The figure is not drawn to scale. Mary poured some water into Tank A and Tank B until the water levels in both tanks were the same. She found out that the total amount of water in both tanks was 32 000 mℓ. She then poured another 1200 mℓ of water into Tank A to fill it to the brim. Find the height of Tank A in the end.
3 m
Level 3
The diagram shows a container made of some identical sections. Figure A shows one section of the container. When 5828 cm3 of water was poured into the container, find the water level in the container.
4 m
Level 3
The figure is not drawn to scale. It shows a tank made from two connected cubical containers, Cube A and Cube B. The tank is filled with some water. Cube A is 34 filled with 6000 mℓ of water while Cube B is completely filled with water. The height of the water level in Cube A is 4 cm higher than that in Cube B. Water is then drained from the tank and the height of the new water level is 5 cm. What is the volume of the water drained in mℓ?
4 m