Level 2
A rectangular container measuring 20 cm by 40 cm by 15 cm is 25 filled with water. Tom wants to fill up the container completely with some bottles of water. How many bottles of water are needed if the capacity of each bottle is 900 mℓ?
Level 2 The tank, measuring 21 cm by 20 cm by 40 cm, is 34 filled with water at first. All the water is poured into empty identical bottles to the brim. Each bottle has a capacity of 700 mℓ.
How much water was there in the tank at first? Give your answer in millilitres.
How many such bottles are completely filled with water?
Level 2 The tank, measuring 21 cm by 20 cm by 40 cm, is 34 filled with water at first. All the water is poured into empty identical bottles to the brim. Each bottle has a capacity of 700 mℓ.
How much water was there in the tank at first? Give your answer in millilitres.
How many such bottles are completely filled with water?
Level 3
In the figure, a fish tank measuring 52 cm by 25 cm by 48 cm contained 2720 mℓ of water. Serene then turned on a tap that flows at a rate of 4.32 ℓ per minute. How long does it take for the tank to be 23 filled with water? Express your answer in min.
Level 3
In the figure, a fish tank measuring 52 cm by 25 cm by 48 cm contained 2720 mℓ of water. Serene then turned on a tap that flows at a rate of 4.32 ℓ per minute. How long does it take for the tank to be 23 filled with water? Express your answer in min.
Level 3
A rectangular tank measuring 50 cm by 25 cm by 19 cm was 12 filled with water. There was a leak at the bottom of the tank and water seeped out at the rate of 5 m? per second. How many minutes would it take to empty the tank completely? Leave your answer correct to 1 decimal place.
Level 3
An empty tank measures 50 cm by 20 cm by 35 cm. Water flows into the tank from Tap A at a rate of 25 ℓ per minute. At the same time, water drains from the tank from Tap B at a rate of 18 ℓ per minute. How long would it take to completely fill the tank?
Level 3
An empty tank measures 50 cm by 20 cm by 35 cm. Water flows into the tank from Tap A at a rate of 25 ℓ per minute. At the same time, water drains from the tank from Tap B at a rate of 18 ℓ per minute. How long would it take to completely fill the tank?
Level 3
A tank measuring 30 cm by 24 cm by 20 cm was being filled by two taps. Tap X delivered water at a rate of 140 cm3 per minute while Tap Y delivered water at a rate of 100 cm3 per minute. How long did the 2 taps take to fill the tank completely? Express your answer in min.
Level 3
A rectangular tank was 45 filled with water. After 56 litres of water was poured out from the tank, it became 110 full. How many litres of water were there in the tank at first?
Level 3
A cuboid has a volume of 300 cm3. Its base is a rectangle which has a perimeter of 32 cm. The ratio of the length to the breadth of the rectangle is 5 : 3. Find its height.
Level 3
The area of one face of the wooden cube is 3600 cm2. A carpenter cut the wooden cube into three cuboids of identical size. After gluing the cuboids together to make a solid figure as shown, he painted all the surfaces of the solid figure red. What was the total surface area of the solid figure that had been painted red?
Level 3
The area of one face of the wooden cube is 3600 cm2. A carpenter cut the wooden cube into three cuboids of identical size. After gluing the cuboids together to make a solid figure as shown, he painted all the surfaces of the solid figure red. What was the total surface area of the solid figure that had been painted red?
