Level 2
A rectangular tank has a base area of 50 cm2. It is half filled with water. If 4 bottles of water are poured into the tank, 250 mℓ of water will overflow. If 3 bottles of water are poured into the tank, 100 mℓ of water will overflow. Find the height of the tank.
2 m
Image in this question is not available.
Level 3
Shemy placed three empty tanks side by side. The smallest tank has a crack at its side and the base area of each tank is 16 cm2. After she turned on the tap for 64 minutes, the height of the water in the smallest tank became 6 cm although 0.5 mℓ of water is leaking out of the crack per minute. Find the rate of flow of water from the tap. Give the answer in mℓ/min.
Level 3
Shemy placed three empty tanks side by side. The smallest tank has a crack at its side and the base area of each tank is 16 cm2. After she turned on the tap for 64 minutes, the height of the water in the smallest tank became 6 cm although 0.5 mℓ of water is leaking out of the crack per minute. Find the rate of flow of water from the tap. Give the answer in mℓ/min.
Image in this question is not available.
Level 2
A container, which is 10 cm long, 9 cm wide and 7.55 cm deep, holds 1510 g of sugar. If 4.95 kg of the same sugar is packed into a tin with a 15-cm square base, how tall must the tin be?
3 m
Image in this question is not available.
Level 3
Figure 1 shows a closed rectangular tank of dimensions 40 cm by 40 cm by 80 cm with a cube of edge 20 cm glued to its bottom left corner. The tank contains 70 litres of water. Figure 2 shows the same rectangular tank lying on its side. Find the height of the water level, in centimetres, corrected to 2 decimal places.
Level 3
Figure 1 shows a closed rectangular tank of dimensions 40 cm by 40 cm by 80 cm with a cube of edge 20 cm glued to its bottom left corner. The tank contains 70 litres of water. Figure 2 shows the same rectangular tank lying on its side. Find the height of the water level, in centimetres, corrected to 2 decimal places.
Image in this question is not available.
Level 3
The figure shows an empty transparent tank made from three containers. The two containers A and B on top are in the form of cuboids which have square bases of side 6 cm and 4 cm as shown in the figure. The bottom container is in the form of a cube of side 14 cm. 3.42ℓ of water are poured into the empty vase. Find the height of the water level from the base of the vase.
(1 litre = 1000 cm3)
Level 3
The figure shows an empty transparent tank made from three containers. The two containers A and B on top are in the form of cuboids which have square bases of side 6 cm and 4 cm as shown in the figure. The bottom container is in the form of a cube of side 14 cm. 3.42ℓ of water are poured into the empty vase. Find the height of the water level from the base of the vase.
(1 litre = 1000 cm3)
Image in this question is not available.
Level 3 PSLE
The figure shows an empty flower vase of height 40 cm. It is made from 2 containers. The top container is in the form of a cuboid which has a square base side 4 cm and height 28 cm. The bottom container is in the form of a cube of 12 cm. 2.16 litres of water is poured into the empty vase. What is the height of the water level from the base of the vase?
(1 litre = 1000 cm3 )
Level 3 PSLE
The figure shows an empty flower vase of height 40 cm. It is made from 2 containers. The top container is in the form of a cuboid which has a square base side 4 cm and height 28 cm. The bottom container is in the form of a cube of 12 cm. 2.16 litres of water is poured into the empty vase. What is the height of the water level from the base of the vase?
(1 litre = 1000 cm3 )
Image in this question is not available.
Level 3
Tank A, measuring 40 cm by 30 cm by 50 cm, was filled with water to the brim. Water was then poured from Tank A to Tank B, which has a base area of 900 cm2 until the height of the water level in Tank B became twice that of the water level in Tank A. Find the volume of water in Tank B, leaving the answer in litres.
3 m
Image in this question is not available.
Level 3
An empty rectangular tank has a capacity of 90ℓ and a height of 50 cm. At 10 am, Tap A is turned on to fill the tank at a rate of 4ℓ per minute for 15 minutes. After 5 minutes, Tap B is turned on to drain water from the tank at a rate of 2ℓ per minute for 18 minutes. What is the height of the water level in the tank in the end? Express the answer in 1 decimal place.
3 m
Image in this question is not available.
Level 3
The figure is not drawn to scale. Tank A measuring 40 cm by 30 cm by 20 cm is filled to the brim. When 35 of water was transferred from Tank A to Tank B, 1.8 litres of water overflowed. Tank B has a base area of 300 cm2. Find the height of Tank B.
Level 3
The figure is not drawn to scale. Tank A measuring 40 cm by 30 cm by 20 cm is filled to the brim. When 35 of water was transferred from Tank A to Tank B, 1.8 litres of water overflowed. Tank B has a base area of 300 cm2. Find the height of Tank B.
Image in this question is not available.
Level 3
The diagrams are not drawn to scale. Diagram 1 shows a rectangular tank containing 6 identical cubes and filled to the brim. It had a length of 40 cm and a breadth of 10 cm. In Diagram 2, four cubes were removed from the same tank and the water level dropped by 2.16 cm.
After that, a certain amount of water was drained off the tank until the water level reaches the same height as the remaining cubes. Find the volume of the water in the tank in Diagram 2 in the end. Give the answer in litres.
Level 3
The diagrams are not drawn to scale. Diagram 1 shows a rectangular tank containing 6 identical cubes and filled to the brim. It had a length of 40 cm and a breadth of 10 cm. In Diagram 2, four cubes were removed from the same tank and the water level dropped by 2.16 cm.
After that, a certain amount of water was drained off the tank until the water level reaches the same height as the remaining cubes. Find the volume of the water in the tank in Diagram 2 in the end. Give the answer in litres.
Image in this question is not available.
Level 3
The figure is not drawn to scale. The tank was 23 filled with water to a height of 30 cm. When a rubber ball was dropped into the tank, the height of the water level was 1.5 cm from the brim of the tank. Find the volume of the rubber ball.
Level 3
The figure is not drawn to scale. The tank was 23 filled with water to a height of 30 cm. When a rubber ball was dropped into the tank, the height of the water level was 1.5 cm from the brim of the tank. Find the volume of the rubber ball.
Image in this question is not available.
Level 3
The diagram shows 3 containers of different dimensions, each separated by a partition. Tank C, measuring 20 m by 15 m by 21 m, is filled with water to its brim. Tank B is an empty cuboidal container with a length of 10 m. Slider 1 is lifted to release
14 of the water from Tank C to Tank B, after which the partition is slid down to separate Tank C and Tank B. Next, Slider 2 is removed and some water from Tank B flows into Tank A such that the height of the water level of Tank B and Tank A is 7 m.
- What is the length of Tank A?
- How many m3 of water are there in Tank B?
Level 3
The diagram shows 3 containers of different dimensions, each separated by a partition. Tank C, measuring 20 m by 15 m by 21 m, is filled with water to its brim. Tank B is an empty cuboidal container with a length of 10 m. Slider 1 is lifted to release
14 of the water from Tank C to Tank B, after which the partition is slid down to separate Tank C and Tank B. Next, Slider 2 is removed and some water from Tank B flows into Tank A such that the height of the water level of Tank B and Tank A is 7 m.
- What is the length of Tank A?
- How many m3 of water are there in Tank B?
Image in this question is not available.
Level 3
A tank, 110 cm by 100 cm by 70 cm, was completely filled with water. It was used to fill 16 bottles, each 3 litres in capacity. What was the height of the water left in the tank after all the bottles were filled. Round off to whole number.
3 m
Image in this question is not available.
Level 3
The figure is not drawn to scale. An empty Tank A measures 50 cm by 20 cm by 40.5 cm. Tank B with a base area of 1000 cm2was completely filled with water. Ronald poured 12 of the water from Tank B into Tank A. The water filled 70% of Tank A. What was the height of Tank B? (Correct the answer to 2 decimal places.)
Level 3
The figure is not drawn to scale. An empty Tank A measures 50 cm by 20 cm by 40.5 cm. Tank B with a base area of 1000 cm2was completely filled with water. Ronald poured 12 of the water from Tank B into Tank A. The water filled 70% of Tank A. What was the height of Tank B? (Correct the answer to 2 decimal places.)
Image in this question is not available.
Level 3
A rectangular tank measuring 35 cm by 26 cm by 12 cm is completely filled with oil. Oil from the tank is poured into an empty cubical container of edge 18 cm until the cubical container is half-filled. What is the height of the oil in the tank after some oil is poured out? Correct the answer to 1 decimal place.
3 m
Image in this question is not available.
Level 3
An iron cube of side 8 cm is melted and recast into a cuboid which has a square base of side 4 cm. What is the height of the cuboid?
Level 3
An iron cube of side 8 cm is melted and recast into a cuboid which has a square base of side 4 cm. What is the height of the cuboid?
Image in this question is not available.
Level 3
The figure is not drawn to scale. A and B are two rectangular tanks. The base area of A is 50 cm2 while the base area of B is 40 cm2. Tank A and B contained some water and the height of the water level in Tank A was 43 cm as shown. Dan then poured some water from Tank A into Tank B. After that, the height of the water level in both tanks became 30 cm. What was the height of the water level in Tank B at first?
Level 3
The figure is not drawn to scale. A and B are two rectangular tanks. The base area of A is 50 cm2 while the base area of B is 40 cm2. Tank A and B contained some water and the height of the water level in Tank A was 43 cm as shown. Dan then poured some water from Tank A into Tank B. After that, the height of the water level in both tanks became 30 cm. What was the height of the water level in Tank B at first?
Image in this question is not available.
Level 3
The figure is not drawn to scale. Mary poured some water into Tank A and Tank B until the water levels in both tanks were the same. She found out that the total amount of water in both tanks was 32 000 mℓ. She then poured another 1200 mℓ of water into Tank A to fill it to the brim. Find the height of Tank A in the end.
Level 3
The figure is not drawn to scale. Mary poured some water into Tank A and Tank B until the water levels in both tanks were the same. She found out that the total amount of water in both tanks was 32 000 mℓ. She then poured another 1200 mℓ of water into Tank A to fill it to the brim. Find the height of Tank A in the end.
Image in this question is not available.
Level 3
The figure shows a cuboid that is formed by putting 12 identical cubes together. The volume of the cuboid is 96 cm3. Find the height of the cuboid.
Level 3
The figure shows a cuboid that is formed by putting 12 identical cubes together. The volume of the cuboid is 96 cm3. Find the height of the cuboid.
Image in this question is not available.
Level 3
The figure shows two tanks. 25% of Tank A is filled with water. Some of this water is then poured from Tank A to Tank B without spilling. The heights of the water level in both tanks are now equal. Find the height of the water level in Tank A after pouring.
Level 3
The figure shows two tanks. 25% of Tank A is filled with water. Some of this water is then poured from Tank A to Tank B without spilling. The heights of the water level in both tanks are now equal. Find the height of the water level in Tank A after pouring.
Image in this question is not available.
