Level 3
A pool measuring 50 m x 25 m x 2 m was completely filled with water. The water was draining out of the tank at a constant rate and became completely empty after 25 minutes.
What fraction of the pool was filled with water at the end of 24 minutes? Express the answer in the simplest form.
How many litres of water was drained out of the pool at the end of 10 minutes?
Level 3
A rectangular container 100 cm by 50 cm by 45 cm was 20% filled with water. A tap was turned on to fill it up with water at a rate of 9 ℓ /min. Every 30 seconds after the tap was turned on, an iron ball of volume 500 cm3 was added to the container. How many iron balls of the same volume would there be in the container when the container is 100% filled with water?
Level 3
This figure is not drawn to scale. A rectangular glass tank 72 cm by 50 cm by 35 cm has 2 compartments, X and Y, with a water height of 30 cm in X and 15 cm in Y. A hole in the slider caused water to leak from X to Y. It was found that the water level in both compartments became the same after some time.
What is the height of water in the tank now?
It took 112 h for the water in both compartments to reach the same level. Assuming that water leaked at a constant rate, how much water flowed from X to Y in 1 minute? Express the answer to 1 decimal place in cm³.
Level 3
This figure is not drawn to scale. A rectangular glass tank 72 cm by 50 cm by 35 cm has 2 compartments, X and Y, with a water height of 30 cm in X and 15 cm in Y. A hole in the slider caused water to leak from X to Y. It was found that the water level in both compartments became the same after some time.
What is the height of water in the tank now?
It took 112 h for the water in both compartments to reach the same level. Assuming that water leaked at a constant rate, how much water flowed from X to Y in 1 minute? Express the answer to 1 decimal place in cm³.
Level 3 PSLE
At first, 18 of a tank was filled with water. A tap was turned on for 30 min for more water to flow into the tank. It was then turned off. The line graph shows the volume of water in the tank over the 30 min.
How many litres of water flowed into the tank in one minute?
At the end of 30 min, what fraction of the tank was filled with water?
The tap was turned on again to fill up the tank at the same rate as before. How many more minutes did it take for the tank to be filled completely?
Level 3 PSLE
At first, 18 of a tank was filled with water. A tap was turned on for 30 min for more water to flow into the tank. It was then turned off. The line graph shows the volume of water in the tank over the 30 min.
How many litres of water flowed into the tank in one minute?
At the end of 30 min, what fraction of the tank was filled with water?
The tap was turned on again to fill up the tank at the same rate as before. How many more minutes did it take for the tank to be filled completely?
Level 3
The figure, not drawn to scale, shows an empty tank measuring 20 cm by 15 cm by 15 cm. Water flows from Tap A at a rate of 300 mℓ per minute and from Tap B at a rate of 180 mℓ per minute. Tower X and Tower Y have a base area of 20 cm2 and 30 cm2 respectively. Water is drained out of the container at a rate of 130 mℓ per minute. Find the height of the water level after 13 minutes.
Level 3
The figure, not drawn to scale, shows an empty tank measuring 20 cm by 15 cm by 15 cm. Water flows from Tap A at a rate of 300 mℓ per minute and from Tap B at a rate of 180 mℓ per minute. Tower X and Tower Y have a base area of 20 cm2 and 30 cm2 respectively. Water is drained out of the container at a rate of 130 mℓ per minute. Find the height of the water level after 13 minutes.
