Level 3
This figure is not drawn to scale. A rectangular glass tank 72 cm by 50 cm by 35 cm has 2 compartments, X and Y, with a water height of 30 cm in X and 15 cm in Y. A hole in the slider caused water to leak from X to Y. It was found that the water level in both compartments became the same after some time.
What is the height of water in the tank now?
It took 112 h for the water in both compartments to reach the same level. Assuming that water leaked at a constant rate, how much water flowed from X to Y in 1 minute? Express the answer to 1 decimal place in cm³.
Level 3
This figure is not drawn to scale. A rectangular glass tank 72 cm by 50 cm by 35 cm has 2 compartments, X and Y, with a water height of 30 cm in X and 15 cm in Y. A hole in the slider caused water to leak from X to Y. It was found that the water level in both compartments became the same after some time.
What is the height of water in the tank now?
It took 112 h for the water in both compartments to reach the same level. Assuming that water leaked at a constant rate, how much water flowed from X to Y in 1 minute? Express the answer to 1 decimal place in cm³.
Level 3
A tank measuring 50 cm by 20 cm by 22 cm, with some cubes placed inside, was filled with 3.875 ℓ of water to the height as shown in Figure 1. Some water was then added into the tank to the height as shown in Figure 2. The total volume of water in the tank then became 8.375 ℓ. What was the volume of one cube?
Level 3
A tank measuring 50 cm by 20 cm by 22 cm, with some cubes placed inside, was filled with 3.875 ℓ of water to the height as shown in Figure 1. Some water was then added into the tank to the height as shown in Figure 2. The total volume of water in the tank then became 8.375 ℓ. What was the volume of one cube?
Level 3 PSLE
The figure shows Tap A, Tap B and an empty tank with a capacity of 54.2 litres. Water flows Tap A at 3.1 litres per minute and from Tap B at 2.9 litres per minute. Tap A was turned on first. Tap B was turned on 2 minutes later. The taps were turned off at the same time when the tank was completely filled without overflowing. How much water flowed from Tap A?
Level 3 PSLE
The figure shows Tap A, Tap B and an empty tank with a capacity of 54.2 litres. Water flows Tap A at 3.1 litres per minute and from Tap B at 2.9 litres per minute. Tap A was turned on first. Tap B was turned on 2 minutes later. The taps were turned off at the same time when the tank was completely filled without overflowing. How much water flowed from Tap A?
Level 3
A tank is to be filled to the brim. Tap A takes 20 minutes to fill the tank while Tap B takes 15 minutes to fill it. How long will it take to completely fill the tank with water if both the taps are turned on at the same time? Leave the answer in minutes and round off to 1 decimal place.
