Level 3
A tank measuring 50 cm by 20 cm by 22 cm, with some cubes placed inside, was filled with 3.875 ℓ of water to the height as shown in Figure 1. Some water was then added into the tank to the height as shown in Figure 2. The total volume of water in the tank then became 8.375 ℓ. What was the volume of one cube?
4 m
Level 3 PSLE
The figure shows an empty tank placed below two taps A and B. It takes 10 min to fill the tank with Tap A alone and 2 min Tap B alone.
  1. With only Tap A turned on, what fraction of the tank will be filled in 1 minute?
  2. Starting with an empty tank, how long does it take for both taps together to fill 14 of the tank? Give your answer in seconds.
3 m
Level 3 PSLE
The figure shows Tap A, Tap B and an empty tank with a capacity of 54.2 litres. Water flows Tap A at 3.1 litres per minute and from Tap B at 2.9 litres per minute. Tap A was turned on first. Tap B was turned on 2 minutes later. The taps were turned off at the same time when the tank was completely filled without overflowing. How much water flowed from Tap A?
4 m
Level 3
A tank is to be filled to the brim. Tap A takes 20 minutes to fill the tank while Tap B takes 15 minutes to fill it. How long will it take to completely fill the tank with water if both the taps are turned on at the same time? Leave the answer in minutes and round off to 1 decimal place.
4 m
Level 3
Container A and B are identical containers with the same base area and height. Container A is filled to the brim with water while Container B is empty. After 240 cm3 of water is poured into Container B from Container A, the depth of water in Container B is 14 the depth of water in Container A. If the height of the container is 25 cm, what is the base area of Container B?
4 m