Level 3
A rectangular tank measuring 60 cm by 50 cm by 40 cm was filled with water to a height of 28 cm at first. After 8 completely filled identical jugs of water were poured into the tank, the new water level in the tank became 32 cm.
  1. Find the volume of water in each jug in cubic centimetres.
  2. How much more water would be needed to fill the tank completely? (Give your answer in litres.)
5 m
Level 3
Container A, measuring 25 cm by 12 cm by 21 cm, is filled with water to the brim. Container B is an empty rectangular container with a square base of edge 20 cm. After some water from Container A is poured into Container B, the height of water in the two containers is the same. Find the height of the water.
5 m
Level 3
Tank A is half-filled with water while Tank B is empty. Abby poured water from Tank A into Tank B without spilling until the water level in both tanks were the same. What is the volume of the water in Tank B now?
5 m
Level 3
The figure, not drawn to scale, shows an empty tank measuring 20 cm by 15 cm by 15 cm. Water flows from Tap A at a rate of 300 mℓ per minute and from Tap B at a rate of 180 mℓ per minute. Tower X and Tower Y have a base area of 20 cm2 and 30 cm2 respectively. Water is drained out of the container at a rate of 130 mℓ per minute. Find the height of the water level after 13 minutes.
5 m
Level 3
A rectangular tank measuring 120 cm by 50 cm by 100 cm is 50% filled with water. 10 identical pails of water that are completely filled are then scooped out from it. The water level drops to 45 cm. The remaining amount of water in the tank is later poured into a container that contains 40 litres of water. The water is then drained out through a tap found at the bottom of the container at 10 litres per minute.
  1. What is the capacity of each pail?
  2. How long did it take to drain the water from the container completely? Answer in terms of minutes.
5 m