Level 3
The figure shows 2 completely filled tanks being emptied of the water from 2 different taps. The difference in height between Tank X and Tank Y is 5 cm. The taps at Tank X and Tank Y were turned on at 0700 and 0830. respectively, until both were completely empty. At 1100, the water level in both tanks was the same. At 1230, Tank Y was completely empty and Tank X was only completely empty at 1300. If the rate of the flow of water from each tap was constant throughout, what was the height of Tank Y?
Level 3
The figure shows 2 completely filled tanks being emptied of the water from 2 different taps. The difference in height between Tank X and Tank Y is 5 cm. The taps at Tank X and Tank Y were turned on at 0700 and 0830. respectively, until both were completely empty. At 1100, the water level in both tanks was the same. At 1230, Tank Y was completely empty and Tank X was only completely empty at 1300. If the rate of the flow of water from each tap was constant throughout, what was the height of Tank Y?
Level 3
Container A and B are identical containers with the same base area and height. Container A is filled to the brim with water while Container B is empty. After 240 cm3 of water is poured into Container B from Container A, the depth of water in Container B is 14 the depth of water in Container A. If the height of the container is 25 cm, what is the base area of Container B?
Level 3 PSLE
Two rectangular tanks are shown. At first, Tank X was empty and one quarter of Tank Y was filled with water. Both taps were turned on at the same time and water from both taps flowed at the same rate of 1.6 litres per minute. How much time will it take for the height of the water to be the same in both tanks? (1 litre = 1000 cm3 )
Level 3 PSLE
Two rectangular tanks are shown. At first, Tank X was empty and one quarter of Tank Y was filled with water. Both taps were turned on at the same time and water from both taps flowed at the same rate of 1.6 litres per minute. How much time will it take for the height of the water to be the same in both tanks? (1 litre = 1000 cm3 )
Level 3
The figure is not drawn to scale. It shows a container made of two connected cubical tanks, A and B. Tank A is sealed at the top and completely filled to the brim. Tank B is 35 filled with 129600 mℓ of water. The height of the water level in Tank B is 1 cm higher than that in Tank A. The height of Tank B is 60 cm. Water is then drained from the container and the height of the water level from the base falls to 30 cm.
What is the capacity of Tank B?
What is the volume of water in the tank now in litres?
Level 3
The figure is not drawn to scale. It shows a container made of two connected cubical tanks, A and B. Tank A is sealed at the top and completely filled to the brim. Tank B is 35 filled with 129600 mℓ of water. The height of the water level in Tank B is 1 cm higher than that in Tank A. The height of Tank B is 60 cm. Water is then drained from the container and the height of the water level from the base falls to 30 cm.
What is the capacity of Tank B?
What is the volume of water in the tank now in litres?
Level 3 PSLE The figure shows the amount of water in two rectangular Tanks, A and B, at first.
Ray poured 14 of the water from A into B to fill it to the top, without overflowing.
How much water was there in A at first?
Ray then poured all the water from B into A. 720 cm3 of water overflowed from A. What was the height of A?
Level 3 PSLE The figure shows the amount of water in two rectangular Tanks, A and B, at first.
Ray poured 14 of the water from A into B to fill it to the top, without overflowing.
How much water was there in A at first?
Ray then poured all the water from B into A. 720 cm3 of water overflowed from A. What was the height of A?
Level 3
The figure is not drawn to scale. It shows an empty container made up of a cuboid, measuring 40 cm by 25 cm by 25 cm and 2 similar cubes of sides 5 cm. Line A is 10 cm. 12.5 ℓ of water is poured into the top cube into the cuboid.
What is the height of the water level from the base of the container?
How much more water in cm3 must be poured in so that the water fills up half of the top cube?
Level 3
The figure is not drawn to scale. It shows an empty container made up of a cuboid, measuring 40 cm by 25 cm by 25 cm and 2 similar cubes of sides 5 cm. Line A is 10 cm. 12.5 ℓ of water is poured into the top cube into the cuboid.
What is the height of the water level from the base of the container?
How much more water in cm3 must be poured in so that the water fills up half of the top cube?
Level 3
A rectangular tank measuring 25 cm by 20 cm by 16 cm is half filled with water. If 3 identical cubes each measuring 10 cm by 10 cm by 10 cm are placed inside the water, find the new height of the water level.
Level 3
A rectangular tank measuring 60 cm by 50 cm by 40 cm was filled with water to a height of 28 cm at first. After 8 completely filled identical jugs of water were poured into the tank, the new water level in the tank became 32 cm.
Find the volume of water in each jug in cubic centimetres.
How much more water would be needed to fill the tank completely? (Give your answer in litres.)
Level 3
A rectangular tank measuring 60 cm by 50 cm by 40 cm was filled with water to a height of 28 cm at first. After 8 completely filled identical jugs of water were poured into the tank, the new water level in the tank became 32 cm.
Find the volume of water in each jug in cubic centimetres.
How much more water would be needed to fill the tank completely? (Give your answer in litres.)
Level 3
Container A, measuring 25 cm by 12 cm by 21 cm, is filled with water to the brim. Container B is an empty rectangular container with a square base of edge 20 cm. After some water from Container A is poured into Container B, the height of water in the two containers is the same. Find the height of the water.
Level 3
Container A, measuring 25 cm by 12 cm by 21 cm, is filled with water to the brim. Container B is an empty rectangular container with a square base of edge 20 cm. After some water from Container A is poured into Container B, the height of water in the two containers is the same. Find the height of the water.
Level 3
Tank A is half-filled with water while Tank B is empty. Abby poured water from Tank A into Tank B without spilling until the water level in both tanks were the same. What is the volume of the water in Tank B now?
Level 3
Tank A is half-filled with water while Tank B is empty. Abby poured water from Tank A into Tank B without spilling until the water level in both tanks were the same. What is the volume of the water in Tank B now?
