Level 3
The figure is not drawn to scale. It shows a tank made from two connected cubical containers, Cube A and Cube B. The tank is filled with some water. Cube A is 34 filled with 6000 mℓ of water while Cube B is completely filled with water. The height of the water level in Cube A is 4 cm higher than that in Cube B. Water is then drained from the tank and the height of the new water level is 5 cm. What is the volume of the water drained in mℓ?
Level 3
The figure is not drawn to scale. It shows a tank made from two connected cubical containers, Cube A and Cube B. The tank is filled with some water. Cube A is 34 filled with 6000 mℓ of water while Cube B is completely filled with water. The height of the water level in Cube A is 4 cm higher than that in Cube B. Water is then drained from the tank and the height of the new water level is 5 cm. What is the volume of the water drained in mℓ?
Level 3 PSLE
David has 8 large cubes and some small cubes. He placed them in a rectangular tank. The tank was filled to the brim exactly. The diagram shows the first layer of cubes.
How many small cubes does David have?
The volume of the tank is 504 cm3. If the large cubes took up 37 of the tank, What is the length of the edge of one small cube?
Level 3 PSLE
David has 8 large cubes and some small cubes. He placed them in a rectangular tank. The tank was filled to the brim exactly. The diagram shows the first layer of cubes.
How many small cubes does David have?
The volume of the tank is 504 cm3. If the large cubes took up 37 of the tank, What is the length of the edge of one small cube?
Level 3
A cylindrical dispenser of capacity 5.7 ℓ was filled with apple juice to its brim. The milk in the dispenser was then dispensed into a cubical container of sides 18 cm, through a tap flowing at a rate of 200 mℓ/min. After 15 min, the tap was turned off and the container was 23 full.
What percentage of the milk in the cylindrical dispenser was left? Round off your answer to the nearest 2 decimal places.
How many litres of milk were there in the container at first? (1 ℓ = 1000 cm3)
Level 3
A tank measuring 50 cm by 20 cm by 22 cm, with some cubes placed inside, was filled with 3.875 ℓ of water to the height as shown in Figure 1. Some water was then added into the tank to the height as shown in Figure 2. The total volume of water in the tank then became 8.375 ℓ. What was the volume of one cube?
Level 3
A tank measuring 50 cm by 20 cm by 22 cm, with some cubes placed inside, was filled with 3.875 ℓ of water to the height as shown in Figure 1. Some water was then added into the tank to the height as shown in Figure 2. The total volume of water in the tank then became 8.375 ℓ. What was the volume of one cube?
Level 3
The figure, not drawn to scale, shows an empty water container made out of 2 different solid shapes. The total height of the figure is 24 cm. The bottom part of the figure is formed by a 12-cm cube. The top part of the figure is formed by a cuboid with the corners of its square base touching the midpoints of the edges of the cube. The figure on the right shows the view of the solid from the top. 2 litres of water is poured into the empty water container. Find the height of the water level from the base of the water container.
Level 3
The figure, not drawn to scale, shows an empty water container made out of 2 different solid shapes. The total height of the figure is 24 cm. The bottom part of the figure is formed by a 12-cm cube. The top part of the figure is formed by a cuboid with the corners of its square base touching the midpoints of the edges of the cube. The figure on the right shows the view of the solid from the top. 2 litres of water is poured into the empty water container. Find the height of the water level from the base of the water container.
Level 3
A rectangular tank measuring 25 cm by 12 cm by 10 cm is 25 filled with water. All the water is then poured into a cubical tank with a side measuring 14 cm. How much more water is needed to fill the cubical tank completely? Give your answer in litres.
Level 3 The figure shows a sealed bottle of height 35 cm. It is made from two containers. The top container is in the form of a cuboid with a square base. The bottom container is in the form of a cube of side 20cm. The height of the water in the bottle (shown in Figure A) is 18 cm.
When the same bottle is turned upside down (shown in Figure B), the height of the water in the bottle is 29 cm. How much water can the sealed bottle hold if it is completely filled?
Level 3 The figure shows a sealed bottle of height 35 cm. It is made from two containers. The top container is in the form of a cuboid with a square base. The bottom container is in the form of a cube of side 20cm. The height of the water in the bottle (shown in Figure A) is 18 cm.
When the same bottle is turned upside down (shown in Figure B), the height of the water in the bottle is 29 cm. How much water can the sealed bottle hold if it is completely filled?
