Level 3
A tank, 110 cm by 100 cm by 70 cm, was completely filled with water. It was used to fill 16 bottles, each 3 litres in capacity. What was the height of the water left in the tank after all the bottles were filled. Round off to whole number.
3 m
Level 3
34 of a rectangular tank, 90 cm by 8 cm by 5 cm, is filled with water. A cubical container of edge 18 cm is filled with water to a depth of 15 cm. If the water in the rectangular tank is transferred to the cubical container until it is filled to its brim, how many litres of water will be left in the rectangular tank?
3 m
Level 3 PSLE
A and B are two rectangular tanks. The base area of A is 80 cm2 while that of B is 50 cm2 . At first, A contained water to a height of 40 cm and B was empty, as shown.
  1. What was the volume of the water in A at first? 
  2. Rashid then poured some water from A to B. After that, the height of the water level in A was twice that in B. What was the new height of the water level in A? Round off the answer to 1 decimal place.
3 m
Level 3
The figure is not drawn to scale. An empty Tank A measures 50 cm by 20 cm by 40.5 cm. Tank B with a base area of 1000 cm2was completely filled with water. Ronald poured 12 of the water from Tank B into Tank A. The water filled 70% of Tank A. What was the height of Tank B? (Correct the answer to 2 decimal places.)
3 m
Level 3
A rectangular tank measuring 35 cm by 26 cm by 12 cm is completely filled with oil. Oil from the tank is poured into an empty cubical container of edge 18 cm until the cubical container is half-filled. What is the height of the oil in the tank after some oil is poured out? Correct the answer to 1 decimal place.
3 m
Level 3
Water has been poured into 2 rectangular containers X and Y. The height of the water level in both containers are the same. The difference in the volume of the two containers is 168 cm3. What is the total volume of water in both containers in cm3?
3 m
Level 3
The figure shows an empty container. It is made from two cubical tanks. Tanks, Cube A and Cube B, are of sides 10 cm and 20 cm respectively. Cube A is attached to the centre of one of the sides of the Cube B. 5 litres of water is poured into the container such that water flows in to fill part of Cube A. What is the height of the water level in the container? Round off the answer to one decimal place.
3 m
Level 3
The figure is not drawn to scale. A and B are two rectangular tanks. The base area of A is 50 cm2 while the base area of B is 40 cm2. Tank A and B contained some water and the height of the water level in Tank A was 43 cm as shown. Dan then poured some water from Tank A into Tank B. After that, the height of the water level in both tanks became 30 cm. What was the height of the water level in Tank B at first?
3 m
Level 3
The figure is not drawn to scale. Mary poured some water into Tank A and Tank B until the water levels in both tanks were the same. She found out that the total amount of water in both tanks was 32 000 mℓ. She then poured another 1200 mℓ of water into Tank A to fill it to the brim. Find the height of Tank A in the end.
3 m
Level 3
The figure shows two tanks. 25% of Tank A is filled with water. Some of this water is then poured from Tank A to Tank B without spilling. The heights of the water level in both tanks are now equal. Find the height of the water level in Tank A after pouring.
3 m