Level 3
The figure is not drawn to scale. The tank was 23 filled with water to a height of 30 cm. When a rubber ball was dropped into the tank, the height of the water level was 1.5 cm from the brim of the tank. Find the volume of the rubber ball.
3 m
Level 3
The diagram shows 3 containers of different dimensions, each separated by a partition. Tank C, measuring 20 m by 15 m by 21 m, is filled with water to its brim. Tank B is an empty cuboidal container with a length of 10 m. Slider 1 is lifted to release 14 of the water from Tank C to Tank B, after which the partition is slid down to separate Tank C and Tank B. Next, Slider 2 is removed and some water from Tank B flows into Tank A such that the height of the water level of Tank B and Tank A is 7 m.
  1. What is the length of Tank A?
  2. How many m3 of water are there in Tank B?
3 m
Level 3
A tank, 110 cm by 100 cm by 70 cm, was completely filled with water. It was used to fill 16 bottles, each 3 litres in capacity. What was the height of the water left in the tank after all the bottles were filled. Round off to whole number.
3 m
Level 3
The figure is not drawn to scale. An empty Tank A measures 50 cm by 20 cm by 40.5 cm. Tank B with a base area of 1000 cm2was completely filled with water. Ronald poured 12 of the water from Tank B into Tank A. The water filled 70% of Tank A. What was the height of Tank B? (Correct the answer to 2 decimal places.)
3 m
Level 3
A rectangular tank measuring 35 cm by 26 cm by 12 cm is completely filled with oil. Oil from the tank is poured into an empty cubical container of edge 18 cm until the cubical container is half-filled. What is the height of the oil in the tank after some oil is poured out? Correct the answer to 1 decimal place.
3 m
Level 3
An iron cube of side 8 cm is melted and recast into a cuboid which has a square base of side 4 cm. What is the height of the cuboid?
3 m
Level 3
The figure is not drawn to scale. A and B are two rectangular tanks. The base area of A is 50 cm2 while the base area of B is 40 cm2. Tank A and B contained some water and the height of the water level in Tank A was 43 cm as shown. Dan then poured some water from Tank A into Tank B. After that, the height of the water level in both tanks became 30 cm. What was the height of the water level in Tank B at first?
3 m
Level 3
The figure is not drawn to scale. Mary poured some water into Tank A and Tank B until the water levels in both tanks were the same. She found out that the total amount of water in both tanks was 32 000 mℓ. She then poured another 1200 mℓ of water into Tank A to fill it to the brim. Find the height of Tank A in the end.
3 m
Level 3
The figure shows a cuboid that is formed by putting 12 identical cubes together. The volume of the cuboid is 96 cm3. Find the height of the cuboid.
3 m
Level 3
The figure shows two tanks. 25% of Tank A is filled with water. Some of this water is then poured from Tank A to Tank B without spilling. The heights of the water level in both tanks are now equal. Find the height of the water level in Tank A after pouring.
3 m