Level 3
Helen used a ribbon of length 1 m 40 cm to tie a cubical gift box with a bow as shown. She used 36 cm of ribbon for the bow. What was the volume of the gift box?
Level 3
Helen used a ribbon of length 1 m 40 cm to tie a cubical gift box with a bow as shown. She used 36 cm of ribbon for the bow. What was the volume of the gift box?
Image in this question is not available.
Level 3
The figure is not drawn to scale. Tank A measuring 40 cm by 30 cm by 20 cm is filled to the brim. When 35 of water was transferred from Tank A to Tank B, 1.8 litres of water overflowed. Tank B has a base area of 300 cm2. Find the height of Tank B.
Level 3
The figure is not drawn to scale. Tank A measuring 40 cm by 30 cm by 20 cm is filled to the brim. When 35 of water was transferred from Tank A to Tank B, 1.8 litres of water overflowed. Tank B has a base area of 300 cm2. Find the height of Tank B.
Image in this question is not available.
Level 3
A rectangular tank was 45 filled with water. After 56 litres of water was poured out from the tank, it became 110 full. How many litres of water were there in the tank at first?
3 m
Image in this question is not available.
Level 3
The figure shows 2 identical containers each holding 202 cm3 of water. The volumes of the water, the cubes and balls in Tank G and Tank H are 646 cm3 and 1183 cm3 respectively. What is the volume of each ball? Give the answer in cm3.
Level 3
The figure shows 2 identical containers each holding 202 cm3 of water. The volumes of the water, the cubes and balls in Tank G and Tank H are 646 cm3 and 1183 cm3 respectively. What is the volume of each ball? Give the answer in cm3.
Image in this question is not available.
Level 3
The diagrams are not drawn to scale. Diagram 1 shows a rectangular tank containing 6 identical cubes and filled to the brim. It had a length of 40 cm and a breadth of 10 cm. In Diagram 2, four cubes were removed from the same tank and the water level dropped by 2.16 cm.
After that, a certain amount of water was drained off the tank until the water level reaches the same height as the remaining cubes. Find the volume of the water in the tank in Diagram 2 in the end. Give the answer in litres.
Level 3
The diagrams are not drawn to scale. Diagram 1 shows a rectangular tank containing 6 identical cubes and filled to the brim. It had a length of 40 cm and a breadth of 10 cm. In Diagram 2, four cubes were removed from the same tank and the water level dropped by 2.16 cm.
After that, a certain amount of water was drained off the tank until the water level reaches the same height as the remaining cubes. Find the volume of the water in the tank in Diagram 2 in the end. Give the answer in litres.
Image in this question is not available.
Level 3
The figure is not drawn to scale. The tank was 23 filled with water to a height of 30 cm. When a rubber ball was dropped into the tank, the height of the water level was 1.5 cm from the brim of the tank. Find the volume of the rubber ball.
Level 3
The figure is not drawn to scale. The tank was 23 filled with water to a height of 30 cm. When a rubber ball was dropped into the tank, the height of the water level was 1.5 cm from the brim of the tank. Find the volume of the rubber ball.
Image in this question is not available.
Level 2
The width and height of the cuboid are the same. Its length is twice of its width. Find the volume of the cuboid.
Level 2
The width and height of the cuboid are the same. Its length is twice of its width. Find the volume of the cuboid.
Image in this question is not available.
Level 2 PSLE
Two rectangular tanks are shown. Tank Y contained water to half its height. All the water from Tank Y was poured into Tank Z without spilling. What was the height of the water level in Tank Z?
Level 2 PSLE
Two rectangular tanks are shown. Tank Y contained water to half its height. All the water from Tank Y was poured into Tank Z without spilling. What was the height of the water level in Tank Z?
Image in this question is not available.
Level 2 PSLE
At first, Containers X, Y and Z contained water as shown. Some water from Containers Y and Z was poured into Container X without any spilling over. The amount of water left in Containers Y and Z is shown. What would be the amount of water in Container X?
Level 2 PSLE
At first, Containers X, Y and Z contained water as shown. Some water from Containers Y and Z was poured into Container X without any spilling over. The amount of water left in Containers Y and Z is shown. What would be the amount of water in Container X?
Image in this question is not available.
Level 3
The length of Cube X is 3 times that of the length of Cube Y. The volume of Cube Y is 64 cm3. Find the difference between the volume of the two cubes.
3 m
Image in this question is not available.
Level 3
A tank with a square base area of 121 cm2 is 60% filled with water. If 4 pails of water are poured into the tank, 756 cm3 of water would overflow. If 3 pails of water are poured into the tank, 128 cm3 of water would overflow. What is the height of the tank ? Give the answer to one decimal place.
3 m
Image in this question is not available.
Level 3
The diagram shows 3 containers of different dimensions, each separated by a partition. Tank C, measuring 20 m by 15 m by 21 m, is filled with water to its brim. Tank B is an empty cuboidal container with a length of 10 m. Slider 1 is lifted to release
14 of the water from Tank C to Tank B, after which the partition is slid down to separate Tank C and Tank B. Next, Slider 2 is removed and some water from Tank B flows into Tank A such that the height of the water level of Tank B and Tank A is 7 m.
- What is the length of Tank A?
- How many m3 of water are there in Tank B?
Level 3
The diagram shows 3 containers of different dimensions, each separated by a partition. Tank C, measuring 20 m by 15 m by 21 m, is filled with water to its brim. Tank B is an empty cuboidal container with a length of 10 m. Slider 1 is lifted to release
14 of the water from Tank C to Tank B, after which the partition is slid down to separate Tank C and Tank B. Next, Slider 2 is removed and some water from Tank B flows into Tank A such that the height of the water level of Tank B and Tank A is 7 m.
- What is the length of Tank A?
- How many m3 of water are there in Tank B?
Image in this question is not available.
Level 3
A cuboid has a volume of 300 cm3. Its base is a rectangle which has a perimeter of 32 cm. The ratio of the length to the breadth of the rectangle is 5 : 3. Find its height.
3 m
Image in this question is not available.
Level 3
A tank, 110 cm by 100 cm by 70 cm, was completely filled with water. It was used to fill 16 bottles, each 3 litres in capacity. What was the height of the water left in the tank after all the bottles were filled. Round off to whole number.
3 m
Image in this question is not available.
Level 3
34 of a rectangular tank, 90 cm by 8 cm by 5 cm, is filled with water. A cubical container of edge 18 cm is filled with water to a depth of 15 cm. If the water in the rectangular tank is transferred to the cubical container until it is filled to its brim, how many litres of water will be left in the rectangular tank?
3 m
Image in this question is not available.
Level 3
The solid figure is made up of 6 identical cubes of edge 7 cm.
- Find the volume of the solid figure.
- Find the total surface area of the solid figure.
Level 3
The solid figure is made up of 6 identical cubes of edge 7 cm.
- Find the volume of the solid figure.
- Find the total surface area of the solid figure.
Image in this question is not available.
Level 3 PSLE
A and B are two rectangular tanks. The base area of A is 80 cm
2 while that of B is 50 cm
2 . At first, A contained water to a height of 40 cm and B was empty, as shown.
- What was the volume of the water in A at first?
- Rashid then poured some water from A to B. After that, the height of the water level in A was twice that in B. What was the new height of the water level in A? Round off the answer to 1 decimal place.
Level 3 PSLE
A and B are two rectangular tanks. The base area of A is 80 cm
2 while that of B is 50 cm
2 . At first, A contained water to a height of 40 cm and B was empty, as shown.
- What was the volume of the water in A at first?
- Rashid then poured some water from A to B. After that, the height of the water level in A was twice that in B. What was the new height of the water level in A? Round off the answer to 1 decimal place.
Image in this question is not available.
Level 3
The figure is not drawn to scale. An empty Tank A measures 50 cm by 20 cm by 40.5 cm. Tank B with a base area of 1000 cm2was completely filled with water. Ronald poured 12 of the water from Tank B into Tank A. The water filled 70% of Tank A. What was the height of Tank B? (Correct the answer to 2 decimal places.)
Level 3
The figure is not drawn to scale. An empty Tank A measures 50 cm by 20 cm by 40.5 cm. Tank B with a base area of 1000 cm2was completely filled with water. Ronald poured 12 of the water from Tank B into Tank A. The water filled 70% of Tank A. What was the height of Tank B? (Correct the answer to 2 decimal places.)
Image in this question is not available.
Level 2
The figure is made of unit cubes. If Joan were to dip the figure in red paint, what area of the figure would be painted?
Level 2
The figure is made of unit cubes. If Joan were to dip the figure in red paint, what area of the figure would be painted?
Image in this question is not available.
Level 3
A rectangular tank measuring 35 cm by 26 cm by 12 cm is completely filled with oil. Oil from the tank is poured into an empty cubical container of edge 18 cm until the cubical container is half-filled. What is the height of the oil in the tank after some oil is poured out? Correct the answer to 1 decimal place.
3 m
Image in this question is not available.
